September 21, 2023 Login  


Unanswered Active Topics Forums Search
Forums > Road > Gear Advice
swapping brake hoods advice - take off or no?
Last Post 05/28/2013 12:31 PM by Nightfend the cyclist. 5 Replies.
Printer Friendly
Sort:
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages
jacques_anquetil

Posts:245

--
05/20/2013 09:07 PM
my shimano dura ace 7900 hoods are worn out and need replacing. does one need to remove the brifter body from the bars to change the rubber or can the new ones be slipped over the front without removal? TIA
zootracer

Posts:828

--
05/20/2013 09:32 PM
don't remove them, it will make it almost impossible to install them that way. I had good luck using a little bit of water on the hoods. some use talcum powder...
jrt1045

Posts:363

--
05/21/2013 09:19 AM
you will need a long, thin regular screw driver to help stretch and guide. be gentle

easy job, worst part is getting all the little rubber tabs where they need to go. do it once and you will never worry about it again
GJanney

Posts:76

--
05/22/2013 10:28 PM
I removed 7900 hoods and replaced them with a different color of Hudz. Didn't use a thin screw driver as jrt suggests, but that could be worth a try. You can slip them straight over the front as you suggest. My LBS recommended spraying the new hoods with rubbing alcohol to make putting the new ones on easier. I didn't use any, but it would likely have been easier.

The thing I watched closely was not to risk tearing the hoods when I was applying pressure (which you WILL have to do). That said, it is a very simple operation and the new hoods will look great.
Dale

Posts:1760

--
05/22/2013 11:41 PM
+1 on the rubbing alcohol. It makes things nice and slick without leaving any residue
nightfend

Posts:48

--
05/28/2013 12:31 PM
I always unbolt the levers from the bars to put new hoods on. I guess it is old habits from when I used to change out 7800 shifters.
You are not authorized to post a reply.
Forums > Road > Gear Advice
Active Forums 4.1
NOT LICENSED FOR PRODUCTION USE
www.activemodules.com

Latest Forum Posts
Shimano crank recall posted in Gear Advice
repair cafe posted in The Coffee Shop
Dawn Patrol ride posted in The Coffee Shop
nutcracker posted in The Coffee Shop
tube vs. tubeless posted in Gear Advice
Distracted driving - even on dirt posted in Road Cycling
Sheesh and a steep climb posted in Road Cycling
No articles match criteria.
  Terms and Conditions | Privacy Policy  Copyright 2008-2013 by VeloNation LLC