June 25, 2018 Login  

Front Derailleur woes
Last Post 12/21/2013 02:48 PM by PC Rider. 3 Replies.
Printer Friendly
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages Informative


12/19/2013 11:57 PM
I just swapped out a poorly shifting red FD with a new to me Dura Ace 7800.  I have adjusted and aligned it according to the pdft from the shimano website.  My problem is that it shifts fine on the work stand, but it will not push the chain up to the big ring when I am riding it.  Well, it does shift when I have my climbing wheels in, but not with my regular wheels.  Is it the b adjustment on the RD that is throwing things off?  Why is that?


12/20/2013 01:02 AM
my first guess would be to make sure it's not hitting the outer limit screw. If that's not it, pull in a little more cable, hopefully with a barrel adjuster. Check the cable routing and make sure it's not catching on anything. Does it shift to the big ring when you are in the smaller cogs? Or not at all?


12/20/2013 08:06 AM
The pull ratio is a bit different on the 2 derailleurs. For a set amount of cable pull the Shimano doesn't move quite as far. Re-route the cable to the outside (opposite) side of the fixing bolt, it changes the pull ratio just enough to make it work a lot better.


12/21/2013 02:48 PM
Thanks CarbonGecko, that did the trick! Night and day difference for such a small change.
You are not authorized to post a reply.

Active Forums 4.1

Latest Forum Posts

Psychology of not improving posted in Training Talk

From Juno Beach, Normandy posted in The Coffee Shop

World Cup talk posted in The Coffee Shop

That was fast! (and precedent?) posted in The Dark Side

No articles match criteria.
  Terms and Conditions | Privacy Policy  Copyright 2008-2013 by VeloNation LLC