April 23, 2024 Login  


Replacing Campy Skeleton brake pads
Last Post 08/08/2016 01:09 PM by Dale Dale. 5 Replies.
Printer Friendly
Sort:
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages
zootracer

Posts:833

--
08/07/2016 11:46 AM
I have the newer Campy Chorus Skeleton brakes. The brake pads are supposed to be removed by placing a small fat headed screw driver in the spring holder and pushing them out. Could not get them to budge. Also removed the holder and attempted to pull out the brake pads with a plier. Still no luck. Any advice, or any other after market brake pad set that would work? My older pre 2000 Campy Skeleton brakes were no problem with brake pad replacement. Yikes!
Cosmic Kid

Posts:4209

--
08/07/2016 05:46 PM
If you can't get them out, just buy a new set of pads with holders and swap 'em out. I currently run Shimano / SRAM pads on my Campag brakes with zero issues and can easily replace the pads.....and i have a lot more pad options now, as well.
Just say "NO!" to WCP!!!!
zootracer

Posts:833

--
08/07/2016 06:30 PM
C.K. Thanks, will the Shimano/Sram hardware work with the Campy 11 Skeleton brakes, or can I use the Campy hardware that I already have? Can't seem to find any info on the internet that addresses that...
Cosmic Kid

Posts:4209

--
08/08/2016 07:20 AM
The Shimano / SRAM hardware should work on the Campag brakes, no problem. The only thing that is "proprietary" about the pads is the shape, not how they attach to the brake arms.
Just say "NO!" to WCP!!!!
zootracer

Posts:833

--
08/08/2016 12:09 PM
Not to admit I'm a bonehead. I bought the Campy Chorus 11 Skeleton brakes back in March. The holders/pads were already on the brakes, so I just instaslled them on my bike. Just discovered the rear brake holders were on ass backwards. I reversed them and now the pads come out easy with the spring release. To top it off, the pads are fine, don't need replacing, so I'm good...another day in the life of a senior citizen...
Dale

Posts:1767

--
08/08/2016 01:09 PM
On backwards!?! You're lucky the pads didn't come out under hard braking since Campagnolo uses a spring clip rather than a set screw to hold them in place.

Glad you have it dialed in.
You are not authorized to post a reply.

Active Forums 4.1
NOT LICENSED FOR PRODUCTION USE
www.activemodules.com

Latest Forum Posts
Flanders (and Roubaix) posted in Professional Racing

Anyone have fun bike projects going? posted in The Coffee Shop

so quiet posted in The Coffee Shop

Hot Stove League posted in Professional Racing

Rohan Dennis charged in death of his wife posted in Professional Racing


Parc des Princes Veldrome posted in Professional Racing

No articles match criteria.
  Terms and Conditions | Privacy Policy  Copyright 2008-2013 by VeloNation LLC