March 20, 2018 Login  

Required tools for Campag EPS installation
Last Post 07/13/2013 11:03 PM by Mike Shea. 5 Replies.
Printer Friendly
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages


07/12/2013 10:16 AM
There is a slight chance that I will be switching from Di2 to EPS in the near future. Having not ridden on Campagnolo since about 1995, I don't have any of their special installation tools. What all will I need? Chain tool? BB spanner? Cassette tool?


07/12/2013 10:38 AM
I switched from DA to Campy (not by choice) and after a year of riding Campy I still prefer Shimano. It's like going from butter to margarine, plus maintenance and parts replacement are outrageous. So far the only tool I had to purchase was a bottom bracket wrench, and a chain tool but that's because my bike has the over sized bottom bracket bearing, not sure what the other campys are.....I say don't do it.
velofellow 2.0


07/12/2013 02:41 PM
If you had a Campy cassette lockring tool in 1995, then I believe you can still use it today. (It’s the same tool used to install/remove the old square-taper bottom bracket cartridge.) If you never had one, then you’ll have to buy one. Park makes one which I’m sure costs less than the Campy model. Believe it or not, the splines on the UT bottom bracket cups are the same as everybody else’s, so any outboard bearing tool should work. The 11 speed chain tool is extremely expensive. You might just be better off buying an 11 speed KMC chain with a master link.
Cosmic Kid


07/13/2013 05:27 PM


Thank you for your attention to this matter.
Just say "NO!" to WCP!!!!


07/13/2013 08:15 PM
Campy :o)


07/13/2013 11:03 PM
Pedros makes a chain tool compatible with Campy 11 chains. Not as slick as Campy's but a lot cheaper
BTW the Pedros tool works on 8, 9, and 10 speed chains too.
You are not authorized to post a reply.

Active Forums 4.1

Latest Forum Posts
Milan-San Remo - get your pics in! posted in Professional Racing

Graeme Obree short film. posted in Gear Advice

Stop it... stop it right now! posted in Gear Advice

Santa Fe? posted in The Coffee Shop

2nd day of spring posted in The Coffee Shop

Paris-Nice (spoiler) posted in Professional Racing

Time to upgrade my repair stand posted in Gear Advice

No articles match criteria.
  Terms and Conditions | Privacy Policy  Copyright 2008-2013 by VeloNation LLC