December 10, 2016 Login  


XTR Di2
Last Post 09/29/2015 09:03 AM by Kenny Gonzales. 9 Replies.
Printer Friendly
Sort:
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages
jmdirt

Posts:775

--
06/02/2014 08:36 AM
I'm looking forward to this trickling down to XT. I tired the K-Edge Di2 converted for mountain bikes a few years ago and liked it. The dirt specific stuff by Shimano should be even better.
jrt1045

Posts:363

--
06/02/2014 09:25 AM
interesting development but after seeing first hand, the cost of high end mtb stuff getting thrashed, I am a little leery of smashing this stuff into the PA rocks and mud. I would settle for enhancements of XT and SLX

It is still kinda neat though in that you just want an easier gear and just push a button and the system moves it all around on the rings as it sees fit

saw an XX1 rear der. crap the bed this weekend, assuming that is like $400 or so. if single ring trickles down to a price that is consumer friendly with weight and performance? that might be the ticket for a while.

For the record (slight drigt here), I am tired of seeing folks attempt to run weight oriented mtb parts in environmentally inappropriate situations.
longslowdistance

Posts:1318

--
06/02/2014 09:44 AM
Ditto on your last comment. What elite racers need may be even farther from regular riders on dirt than on the road. Just built up a new MTB for me with X9. A bitty porky, but robust.
Dale

Posts:823

--
06/02/2014 10:05 AM
When I can pick up take-off RD's at the local bike shop for $50.00 to run on my cross bike as I can 105 and sometimes Ultegra then I'll consider Di2 or XX1. With RD's being a 'consumable' part in cross racing and mbt'ing I like to take the weight penalty rather than the financial hit.
Gonzo Cyclist

Posts:527

--
08/24/2014 10:25 PM
been watching the pros use this, Julien Absalon to be exact, kind of intrigued with the whole no front shifter, it just automatically moves to the next gear
JRT, that stuff in ridiculously priced, I was looking at doing the XO1 on my Ritchey, my wholesale cost was almost a grand, I can do an XT 1x10 for a couple hundred bucks.
I was say that the 1x11 works very nice, I am amazed at how quiet the system runs
Master50

Posts:317

--
08/25/2014 02:07 PM
For my purposes this is very good news for our planned tandem as this will work fine with road controls. Just don't know if I can use a front triple or only a 2 chainring setup? The full range from low to high under just 1 lever might remove any issues with this but tandem equipment can now work with Hydraulic levers, so disks too.
Gonzo Cyclist

Posts:527

--
09/14/2015 09:38 AM
Chain Reaction Cycles has this stuff at some pretty decent prices, but is still like 7 bills for the set up.

Master, you can run a double front, there is not front shifter, the system just knows which gear is next in the sequence.
longslowdistance

Posts:1318

--
09/14/2015 12:43 PM
Does 11 speed mtb require a different hub than 10?
longslowdistance

Posts:1318

--
09/14/2015 01:03 PM
Ah, found my answer online. I happen to have DT hubs, so it would not be cheap to convert to 1x11.
Gonzo Cyclist

Posts:527

--
09/29/2015 09:03 AM
yeah, looking at that myself LSD, if, and that's a big IF, I decide to install gears on my Ritchey P-29er, I'll go 1x11 XTR electric for sure, but the new SRAM Gx 1x11 has a really nice price point
You are not authorized to post a reply.

Active Forums 4.1
NOT LICENSED FOR PRODUCTION USE
www.activemodules.com

Latest Forum Posts

Signs that the Apocalypse is upon us posted in The Coffee Shop



Major races to reduce number of riders posted in Professional Racing

Black Friday ride posted in The Coffee Shop

El Tour de Tucson posted in Professional Racing

No articles match criteria.
  Terms and Conditions | Privacy Policy  Copyright 2008-2013 by VeloNation LLC